1/2" Drive Hex/Allen Key bit Socket Set Metric Sizes 4mm - 19mm AT659

Product Information

The term "hex key" is best known as " Allen" in the English-speaking countries like the UK, Australia, Canada and the U.S. (The "Allen" name is a registered trademark, originated by the Allen Manufacturing Company of Hartford, Connecticut circa 1910, [1] now owned by Apex Tool Group, LLC, which was acquired by Bain Capital in 2014), and also in Spain and Mexico ( llave Allen, in Spain pronounced with Spanish double L, /ʎaβe aʎen/).

Some screws have heads designed to accommodate more than one kind of driver, sometimes referred to as combo-head or combi-head. The most common of these are a combination of a slotted/Phillips head.JIS" or ISO 8764 standardized cruciform-blade screwdrivers are available for this type of screw, and should always be used to avoid head and driver damage. Line Head and Line Recess screw drives are Japanese systems with male, female and tamper-resistant configurations. [72] Coin-slot drives are so-called because of the curved bottom of the recess, which facilitates driving them with a suitable coin. They are often used on items where the user is not likely to have a screwdriver when needed, such as recessed screws that attach cameras to tripod adapters, and battery compartments in some equipment such as children's toys. [ citation needed] Hi-Torque [ edit ]

Screwdriver bits". McMaster-Carr catalog (116thed.). p.2806. Archived from the original on 2019-12-14 . Retrieved 2010-06-11. Most tamper-resistant screw configurations rely on the common unavailability of corresponding drivers to reduce the likelihood of widespread tampering. True tamper-proof - rather than merely resistant - screw drives include the breakaway head and one-way screw drives. While a Phillips screwdriver has slightly tapered flanks, a pointed tip, and rounded corners, a Pozidriv screwdriver has parallel flanks, a blunt tip, and additional smaller ribs at 45° to the main slots. The manufacturing process for Pozidriv screwdriver bits requires a slightly more complex cutter than that for Phillips, however both can be manufactured in four cuts from a tapered blank. Wilder, George. "What are the differences between the two types of drive– Phillips and Posidriv?" (PDF). v8register. Archived (PDF) from the original on 2016-04-09 . Retrieved 2017-09-02. A Phillips screw head is slightly different from a PoziDriv; [10] see §Pozidriv section below for details.

The 12-spline flange screw drive has twelve splines in the fastener and tool. It consists of 12 equally spaced protrusions, each with a 60° angle. It is achieved overlaying 4 equilateral triangles, each one rotated 30° over the previous one. The spline drive was part of the obsolete, U.S-designed Optimum Metric Fastener System and was defined by ASTM B18.2.7.1M, which was withdrawn in 2011, [81] making the spline drive obsolescent. Fastener Superstore Fastener Guide". Archived from the original on 2017-12-29 . Retrieved 2017-12-28. Oberg, E. Jones, F. Horton, H. (1984). Machinery's Handbook, 22nd ed. New York: Industrial Press Inc. pp. 1157, 1159 Frauenfelder, Mark (2011-01-20). "Apple's diabolical plan to screw your iPhone". Boing Boing. Archived from the original on 2011-01-23 . Retrieved 2011-01-23.

Anyone else who spots something suspicious can always report it to our Customer Service team, so our Fraud team can investigate. Alloy Artifacts, Various Tool Makers (section on Allen Manufacturing Company), archived from the original on 30 December 2011 , retrieved 25 January 2012.

ISO 4754-1983(E) Cross recesses for screws" (PDF). Archived from the original (PDF) on April 30, 2023 . Retrieved October 1, 2023. The knife manufacturer Microtech uses a variation of this with 3 round holes arranged in a triangle shape. The camera company Leica Camera has used versions of this on rewind knobs and other levers on their rangefinder cameras. [ citation needed] 12-spline flange [ edit ] The 12-pointed internal star shape superficially resembles the "double hex" fastener head, but differs subtly in that the points are shaped to an internal angle of 90° (derived from a square), rather than the 120° internal angle of a hexagon. In practice, drivers for the fasteners may be interchangeable, but should be examined carefully for proper fit before application of force. A hex key should not be used where a key of square cross-section is the correct fit. Brewer, Dennis C. (2012). Build your own free-to-air (FTA) satellite TV system. New York: McGraw-Hill. p.13. ISBN 978-0-07-177516-8. OCLC 778421711. These guidelines and standards aim to keep the content on Booking.com relevant and family-friendly, without limiting expression or strong opinions. They're also applicable regardless of the comment's tone.

Call Allen Ford Romford Service Centre Parts: 01708 917962 Service: 01708 917961 Bodyshop: 01708 242651

Combo drive". Klien Tools. 3 November 2014. Archived from the original on March 11, 2015 . Retrieved 1 July 2022. Lox: Screws Designed for Power Tools". www.lox.com. Archived from the original on 2017-12-09 . Retrieved 2017-12-24.