For the Torx type of design, the angle is much closer to 90° than in the case of the hex head, and so for a given torque the potentially damaging radial force is much lower. This property allows the head of the fastener to be smaller for the same required torque, which can be an advantage in applications where space to accommodate the head is limited. Technical Information on Fasteners: Design recommendations 11.1 Inside drives for screws – AW drive (AW-Antrieb)" (PDF). Adolf Würth GmbH & Co. KG . Retrieved 2 March 2017. a b "TORX Drive System" (PDF). Textron Fastening Systems. Archived from the original (PDF) on 2007-01-02. Torx (pronounced / t ɔːr k s/) is a trademark for a type of screw drive characterized by a 6-point star-shaped pattern, developed in 1967 [1] by Camcar Textron. [a] A popular generic name for the drive is star, as in star screwdriver or star bits. The official generic name, standardized by the International Organization for Standardization as ISO 10664, is hexalobular internal. [2] This is sometimes abbreviated in databases and catalogs as 6lobe (starting with the numeral 6, not the capital letter G). Torx Plus, Torx Paralobe and Torx ttap are improved head profiles. [3]

T35 Torx (star) Bit/Driver - Tacoma World T35 Torx (star) Bit/Driver - Tacoma World

Sharke, Paul (June 2005). "Fast and Secure: how much proof is tamperproof?". Mechanical Engineering. 127 (6): 32. doi: 10.1115/1.2005-JUN-2. ISSN 0025-6501. Archived from the original on 2007-02-09 . Retrieved 2012-01-14. {{ cite journal}}: CS1 maint: bot: original URL status unknown ( link) Typically you can get by using a allen/hex key on them if you are in a bind. Use metric or standard to see which one fits best. If the bolts are tight or frozen do not use this method since it can strip out . Pavlis, Egon (16 March 2010). "When a Phillips is not a Phillips Plus So Much More!". Instructables. By design, Torx head screws resist cam out better than Phillips head or slot head screws. [1] Whereas the tendency of Phillips drivers to cam out under excessive torque has been listed as a feature preventing damage to the screw-head or driver, [5] Torx heads were designed to prevent cam-out. The development of better torque-limiting automatic screwdrivers for use in factories allowed this change. Rather than rely on the tool to slip out of the screw head when a desired torque level is reached (which risks damage to the driver tip, screw head, or workpiece), torque-limiting driver designs achieve a desired torque consistently.a b c d e "Chart of Torx fasteners and tools". Wiha Tools USA. Archived from the original on 2015-12-26 . Retrieved 2012-01-14. I couldn't find a source at local stores or online, but I did find a number of posts of forums across the internet where people were looking for this elusive size.

Torx T35 Mystery Solved - Ford F150 Forum Torx T35 Mystery Solved - Ford F150 Forum

Construction Range Overview (Fasteners: Introducing the AW Drive System, p. 3)" (PDF). Würth New Zealand. 2016.

I wanted to install my HPA cold air intake today, but I needed a few tools first. Many stops later, I still need a T35 torx. I don't think such a thing exists, or if it does, it is a rare and elusive beast that is never seen in the hardware and tool stores of the North Hollywood/Los Angeles valley area. Find sources: "Torx"– news · newspapers · books · scholar · JSTOR ( March 2013) ( Learn how and when to remove this template message)