After the devices have been added they can be configured with different effects listed below. These settings can be accessed by navigating to the integration settings in Settings -> Integrations and selecting the “Magic Home” configuration for the bulb or controller. Supports UCS1903, SM16703, WS2811, WS2811B, SK6812, INK1003, WS2801, WS2815, APA102, TM1914, UCS2904B

The Anpress bulb needs to have a dedicated light fixture also so it can be charging, but it will not give light until the power is off or the circuit broken. When it goes on in an outage, you have to physically slide the button on the bulb to turn it off- so it is unsuitable for ceilings in my opinion. Energy saving LED Bulbs with IR remote and multifunctional battery operated lights. Can use as bulb and flashlights， cordless bulbs, rechargeable emergency lights for home power failure with an internal rechargeable 2200mAh battery high power. led light bulbs 60 watt equivalent.Thought I'd dislike this toy, but it actually works well. It is not that awful bluish cold led light-rather it's a bit warmer. I use it in my bathroom fixture. The remote is the thing that makes it work for me. Other emergency bulbs stay on when power is out, or you have to manually turn them off at the bulb switch. This one comes on, but I can just aim the remote and turn it off to save it's battery. If you want to run it like a normal bulb without the emergency feature, then the wall switch will work like usual. However, if you want to use it as an emergency light but still have it switch on and off using the wall switch, then you will find it goes "on" (using its battery) when wall switch is 'down' and "off" when wall switch is 'up' position. It is charging when the wall switch is 'up' but doesn't give off light (you'll see a red glow button). The remote can override your wall switch. The integration offers a custom service to enable you to set the lights to a custom light effect. Service data attribute The Magic Home integration supports several brands of switches, bulbs, and controllers that use the same protocol. Chances are high that your bulb or controller (eg. WiFi LED CONTROLLER) will work with this integration if you can control the device with the Magic Home app or the Surp Life app.

Good choice for indoor led light bulb / camping lights & lanterns, power outage lights, rechargeable light bulbs, remote control light bulbs, emergency light bulbs, battery lights with remote and flashlighting, well worked as the wireless lamps for 4 -12 hours after fully charged. Dimmable light bulbs with 3 levels brightness, 1️⃣Level,4-5hours at 100% brightness.2️⃣level,8-10hours at 50% brightness. 3️⃣level,10-12hours at 10% brightness. If used as a cordless night light bulb, The 3th brightness is recommended, Longer working hours. A list of RGB colors can be entered to create an effect. The effect speed can be adjusted using the slider underneath. If a strip controller device will not stay on wifi or goes offline during adjusting colors and effects, upgrading to a power supply with a higher amperage usually resolves any stability issues. EffectsSupports WS2812B, SM16703, SM16704, WS2811, UCS1903, SK6812, SK6812RGBW (WS2814), INK1003, UCS2904B I have found that the three bulbs I am experimenting with each have a specific use in my cabin during an outage. This one is the smallest and fits more lamps. It has several ways of employment but doesn't seem too bright.