You will find that a small amount of water, added to form it into a slurry, will make it easier to fill the joints properly. When using the wet method - the water is used to assist our jointing compound into the joints, it will self-compact and fill any voids.

When pointing a porous surface, such as Sandstone and Limestone, it is recommended to use plenty of water as this helps prevent temporary staining from the compound. EASYJoint is perfect for patios, paving and paths that only have pedestrian foot traffic, however will not withstand the weight of a car or larger van. When the water has drained away, a "flicking" motion with a clean soft hand brush (not the same one used to apply the compound) will aid the removal of any loose grains. Detailed instructions on how to joint paving with our sweep in sand can be found inside the EASYJoint tub. EASYJoint is the UK’s top selling paving jointing compound, favoured by trade professionals and DIYers alike.

Yes, you can use our jointing compound with porcelain tiles, in fact some specialist suppliers only recommend EASY Joint for jointing them! Yes, EASY Joint must have a permeable and strong foundation (one that allows water to pass through to the ground below). The 103 third parties who use cookies on this service do so for their purposes of displaying and measuring personalized ads, generating audience insights, and developing and improving products. If heavy or prolonged rain is forecast, it is ideal to wait for drier conditions as heavy rain may disturb sand particles in the EASYJoint mix before it cures solid, giving an uneven texture. A 6:1 bedding mix (six parts sharp sand to one part cement) when laying the paving is ideal in that it provides enough porosity in the mix for water to escape and the product to cure.

Market-leading EASYJoint is ideal for all types of paving such as natural stone, limestone, porcelain, sandstone, Yorkstone, Indian Stone, granite setts and concrete flags. Water can also help the compound flow in to the full depth of the joint cavity and aids compression of the compound. Peppard Building Supplies — North Reading’s Premier independent builders merchant and first choice for the professional and DIY enthusiast alike. We recommend two people working together; one sweeping the grout into the joints, the other using the hose to ensure an even spread of plenty of water.Any unused compound can be kept in the tub and submerged in water for use on another project in future.

In terms of application, there is not so much need to use copious quantities of waterwith porcelain as the EASYJoint will not cause it to mark in the same way it can with stone or concrete. This gap shape can be the most challenging to work with and we recommend you carefully follow the instructions below. Particularly sensitive, porous stone should always be sealed on both sides and all edges as a precaution. Always use a fan type nozzle at a 45 degree angle and no closer than 15 cms / 6 inches to avoid removing the jointing material from between your slabs.This product is Stone Grey coloured and will complement light, dark or medium grey paving by adding another layer of contrast. There is no need to push EASY Joint into the joints, our paving compound does the hard work for you, falling into the paving gaps, filling voids and compacting. Whilst not essential, it is strongly recommended to "point" or "strike" the surface of the joints with a suitable finishing tool. In dry conditions and warm temperatures and humidity, EASYJoint should be firm enough to walk on within 24 hours and will cure hard within a few days.

Using small quantities of EASYJoint, simultaneously spread and wash the compound across the surface using a light jet of water and abroom/squeegee, allowing it to fall into the joints. For expert information on how to use brush-in grout make sure to visit our dedicated Help and Advice section. If using the wet method, ensure that the bedding mix is permeable and made up from a mix no stronger of 6 parts sharp sand to one cement. EASYJoint is the original sweep-in jointing Compound and still the best truly "All Weather Paving Joint Compound" available and made in the UK. EASYJoint in Stone Grey is the original sweep-in jointing Compound and still the best truly “All Weather Paving Joint Compound” available and made in the UK.

EASYJoint can be applied in virtually any weather conditions, however it is best practice to ensure that ground temperatures are greater than 3 degrees during the grout installation. The person with the hose should alternate between following the sweeper to aid washing the compound into the joints and moving ahead of them so that the paving is always wet. It is suitable for all types of paving material provided there is a gap of at least a3mm wide and 25mm deep (narrow joint compound).