Hi what size would you recommend for CBR900 Fireblade & are they waterproof?Thanks October 25, 2017 What size do you recommend for a Honda Pan European with side panniers & a top box? Thanks April 3, 2018 No, due to the improvements in the Aquatexx EV® fabric, there is a slight colour change between the older and newer versions of Aquatexx® material.

A motorcycle exhaust and engine components can be far hotter than 150 degrees directly after use, so the cover should not be used until the motorcycle has cooleddown. I've bought an accessory, such as a skull cap, to use with my older Aquatexx® bivvy, but the colours are different. Is this a fault? Can you confirm what size I'll need for a new Honda Forza 300? The scooter cover appears to be too short in length? August 11, 2018

Reviews

What size cover do you recommend for a 1972 BMW R60/5 with tall windscreen andtopbox? August 9, 2017 Repair Accessories A range of items which can be used with existing hardware or along with our new range of goods.

Aquatexx EV® has been tested under laboratory conditions to a minimum of 25,000mm HH, meaning a column of water 25,000mm high is needed before water will come through the material. This is currently the highest rating for bivvy material available on the market today, with most other comparable bivvies achieving around 15-20,000 HH.

Enquiry form

Aquatex ® is a ready-to-use aqueous mounting medium used primarily in connection with hematology specimens stained by means of enzyme-cytochemical reactions. It can also be used for mounting purposes in connection with immunohistological specimens or histological lipid stains in frozen sections, e. g. using Oil red O staining solution (Product number 1.02419). I've noticed that in longer rain showers or consistent rain that the beading effect is not so obvious. Is my bivvy still waterproof? Our bivvies are designed to be used for long periods where they will be exposed to all elements - rain, wind and the sun and under normal usage conditions, Aquatexx EV® will give you long and trouble free service. Please see our Care and Maintenance section for more information on how to manage condensation inside your bivvy.

If the waterproofing quality of the canvas has been affected, the damage can usually be rectified by using "AquaTex" impregnator spray. The awning must be thoroughly dry and clean before application. "AquaTex" will not function on dirt; therefore, the canvas should be sprayed on the inside of the awning. If there are any leaks in the material, "AquaTex" will penetrate and be effective on the outside as well. If the material is very dry, you may notice some discolouration on the outside. To regularise the colour, simply spray on the outside as well. DON'T FORGET it is most important to clean the awning inside and out BEFORE impregnation as any deposits on the material will negate the properties of the "AquaTex". For example, the nicotine from cigarettes will affect the material and the waterproofing. Isabella recommends usingtheir IsaClean products to ensure the canvas will be thoroughly clean safely.Does the cover have slots at the wheels that you can use when using a chain to secure thebike? August 9, 2018 The front of the shelter can be completely removed to open it up for maximum visibility; alternatively, you can customise the three vents on the front and the two super large vents at the rear and sides to optimise ventilation. If the waterproofing quality of the canvas has been affected, the damage can usually be rectified by using "AquaTex" impregnator spray. The cabin/ awning must be thoroughly dry and clean before application. "AquaTex" will not function on dirt; therefore, the canvas should be sprayed on the inside of the awning. If there are any leaks in the material, "AquaTex" will penetrate and be effective on the outside as well. If the material is very dry, you may notice some discolouration on the outside. To regularise the colour, simply spray on the outside as well. DON'T FORGET it is most important to clean the cabin / awning inside and out BEFORE impregnation as any deposits on the material will negate the properties of the "AquaTex". For example, nicotine from cigarettes will affect the material and the waterproofing. It is a good idea to have a can of "AquaTex" handy at all times as it has a wide variety of uses besides impregnating your cabin/awning. For instance "AquaTex" can also be used on stiff zips, removal of stains and, even impregnating your shoes or boots. AquaTex colourless waterproofer for cabins / awnings It is a good idea to have a can of "AquaTex" handy at all times as it has a wide variety of uses besides impregnating your awning. For instance, if you experience difficulty in drawing your awning beading through the caravan channel, spray the channel and the awning will slip through easily. "AquaTex" can also be used on stiff zips, removal of stains and, even impregnating your shoes or boots. Look for yourself how easy it is: Warning:

What size cover do I need for my Vespa scooter with topbox. Do I measure the height to the top of the mirrors (as this is 137cm) or to the height of the topbox which is 105 cm. The length is 203 cm and the width 90cm across the mirrors but 44 cm across widest part of body (footrests) November 6, 2018It provides a guaranteed level of water required before penetrating the fabric. The higher the mm rating, the more waterproof a material is, allowing it to be exposed to more water before starting to soak through. To optimise the long term effectiveness of our Aquatexx EV® bivvies and accessories, we recommend that our Revive Shelter Complete Care Kit is used at regular intervals, to both clean and re-proof the outer fabric of the bivvy.