The 3/4" x 3/8" steel miter bar features up to six independent nylon expansion rings to ensure a perfect fit with the slot in your saw. A removable steel T-Clip helps to keep the miter gauge on your saw when fully retracted for wide crosscuts. Don't let the small size fool you! The NEW Miter V120 puts high-resolution, repeatable accuracy within the budget of every woodworkers. An incredible 120 angle stops are laser cut into the steel protractor, with a stop available for every whole degree and two special stops at 22.5 degrees for cutting eight-sided frames and mouldings.

ZERO side play, low-friction travel on table saws with square-sided miter slots measuring 3/4 inch (19 mm) wide, 3/8 inch (9.5 mm) deep, and with or without a 15/16 inch (23.7 mm) T-slot at the bottom. The miter bar's adjustment range accommodates actual slot widths between 0.740 and 0.765 inch (18.8 - 19.4 mm) INCRA Miter Gauge 5000 blends the incremental angle control features of the Miter 3000SE with a very special 3-Panel Sled for the ultimate miter cutting workstation for the table saw. For adequate support laterally, the Miter 5000 requires a minimum of 254mm (10") from the side of the outer edge of the miter slot to either the left or right edges of the saw (sled can be installed on either side of the blade). Eliminates All Drag Between Workpiece and Table Saw, ESPECIALLY for Extra Large Workpieces Superb Crosscut &Mitering ControlShown here with optional INCRA Miter Gauge. Miter Gauge not included! Blade cover removed for demonstration purposes. Do not work without blade cover! INCRA Miter Gauge V27 is engineered to provide a high performance, yet low cost upgrade for any tool in need of a better miter gauge such as a Table Saw, Band Saw, Router Table, Disk Sander or Belt Sander. Miter gauges don’t offer control or accuracy when pulled beyond the front of the saw, while the 5000 can crosscut 23" x 34" plywood cabinet sides with ease on most full size 10" table saws.

The advantages are simple: The Miter Express doubles your miter gauge's capacity for cutting large panels, it offers more hold down options for greater safety when cutting small parts, and it provides better control overall because the lumber is carried through the blade instead of pushed across the saw. The Miter 1000's adjustable miter bar will fit square-sided miter slots measuring 3/4" wide, 3/8" deep, and with or without a 15/16" T-slot at the bottom. The miter bar's adjustment range accommodates actual slot widths between 0.740" and 0.765".What makes the Incra 1000HD different is that it’s HIGH DEFINITION! If you look at the protractor head you’ll see more teeth than my new puppy Abby. That’s 180 positive stops. Yeah that’s right. A stop for every degree including 90 in both directions. And it has 1/10 of a degree resolution thanks to the vernier cursor. Criteria: I included every manufacturer I could find that makes a miter gauge with a fence. There are several other miter gauges on the market that do not come with a fence, but to keep the playing field even I did not include those in this review.