Still working in sections, a very small amount of oil, approx. 1-2 ounces, is poured on the floor and carefully polished into the wood with a WHITE floor pad. Repeat until done. Reinig het oppervlak grondig met Worktop Oil , 1:20 gemengd. Nadweilen met schoon water. Na het reinigen het oppervlak minimaal 12-24 uur laten drogen Osmo Extra Thin 1101 are especially great for denser timbers such as Beech, Bamboo and Walnut worktops. While Osmo Top Oilis a hard-wearing treatment specially formulated to protect your wooden kitchen worktop surface with a semi-matt appeal. Its highly hardwearing oil which has a natural microporous natural hardwax-oil wood finish. It is extremely moisture and water repelling and dirt resistant. The finish is resistant against wine, beer, cola, coffee, tea, fruit juices, milk, water and food particles. These types of liquid spillages will tightly bead on the surface without leaving any marks and can be simply cleaned by wiping with a cloth.

Contrary to its name, teak oil in fact does not actually contain any oils or reminiscent of the teak tree. Many products are referred to as “teak oil” because they are marketed for use on teak and other similar timbers. Teak oils’ composition may vary but it is most often based upon a mixture of linseed oil, varnish, and mineral spirits. Many types of teak oil provide a good protective barrier for wooden worktops, but will often create a glossy sheet that – in our opinion – does not accentuate the beauty of hardwood timber worktop and looks artificial.Træoverfladen bør behandles 2-3 gange inden den tages i brug. Ved sidste behandling kan der med fordel slibes i den våde olie med vådslibepapir korn 320-400 inden aftørring med fnugfrie bomuldsklude.

Technique A , working in a section of about 50-100 sf, with a ¼ nap paint roller or trim pad apply an even coat of oil. Wait 5-10 minutes and then using a 175 RPM floor buffer/polisher start polishing in the oil with a RED buffing pad attached. Or see Technique B Our product range is divided into a manageable step by step system focusing on the following: Preparation, Basic treatment and care and maintenance. Extremely tough and hard-wearing seal which protects against aggressive stains such as wine, fruit juices and etc. Thoroughly clean the surface with Intensive Wood Cleaner, mixed 1:20. Then wash with clean water. After cleaning, leave the surface to dry for at least 8-9 hours Requires multiple coatings to build up the protective barrier (Note: this is rather easy and pleasant activity).

Experts in Woodcare since 1969

That makes it easy to find the products and processes that provides the best results, so the lifespan of the wood is prolonged, and it maintains its natural glow. How much oil to apply comes down to the type of oil used. It’s true to say that using a traditional oil such as ‘Danish oil’ would require more coats and on a more regular basis. Hard Wax Oils like those supplied by Manns, Osmo, Holzol and Woca are made from a blend of oils, waxes and resins. The benefit of these is that they offer exceptional durability, are very easy to apply and maintain, require minimal maintenance and in most cases require just 2 thin coats.