Fireangel Fire Angel FA6120-INT Smoke Alarm, White

Product Information

Activated by attaching to the base plate, the FA6120-INT optical smoke alarm is designed to detect slow, smouldering fires especially those maintained by soft furnishings making it ideal for installation in bedrooms and living rooms. The new FireAngel FA6120-INT has been designed to simply twist onto your existing base plate with no need to drill any more holes in your ceiling or redecorate. This alarm features optical sensing technology, is certified to the European Standard EN 14604 and is perfect for landings, hallways and bedrooms. Our FA6611-R and FA6615-R alarms will require a new MP7 baseplate installed when replacing any end of life alarms. The FireAngel FA6120, 10 year sealed for life battery powered smoke alarm features an optical sensor which detects slow smouldering fires.

If goods are faulty or damaged on receipt we will ask for photographic evidence of the fault or damage where feasible. Replace your end of life FireAngel HT-630 heat alarm with the FA6720-R to continue to be alerted to fires that may start in your kitchen, attic or garage. If your alarm is not a sealed battery alarm, then install the batteries following the steps within the manual.It is the ideal solution to replace your old SI-610 with no need to change the base plate or redecorate. The FireAngel FA6120-INT is powered by a sealed 10-year battery, with no requirement to change batteries for the entire 10-year lifespan of the alarm. The FA6620 alarm cannot be interlinked to other alarms in your home, but still offers a high protection against fire. With our sleep easy function, you can silence low battery chirps for 8 hours by pressing the large self-test button.

To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. The sensor within the unit will deteriorate after 10 years, so to ensure you're protected we recommend you replace the unit after this time. FireAngel recommend a CO alarm is installed between 1 m and 3 m away from each fuel-burning appliance, as well as installing additional units in areas such as living rooms and bedrooms where you spend most time whilst at home. Powered by a 10 year sealed lithium battery, the FireAngel FA6120-INT optical smoke alarm is a direct replacement for the FireAngel ST-622, ST-620, SO-601, and SI-610 with no need to change the baseplate. We would install these alongside heat alarms in the kitchen, garage and attic and have the alarms interlinked so that if one alarm sounds, they all sound.I bought it to replace a similar 10 yr guarantee Fireangel alarm which was malfunctioning (the alarm was sounding randomly every so often, say every 5-10 hrs) which was about 5 yrs old - I couldn't find my purchase receipt. The red indicator LED on the front of the alarm should flash approximately once every 45 seconds to show that the alarm is active. WARNING: Removing the smoke alarm from its base plate will deactivate the unit and prevent it from detecting smoke. The optical smoke sensing chamber works by 'seeing' smoke as it enters the alarm - making it perfect for slow burning fires where there is thick white smoke. Additional charges for customs clearance must be borne by you; unfortunately, we have no control over these charges and cannot predict what they may be.

However, if you’re unable to turn the baseplate enough for these to be seen then we can offer an alternative baseplate.Our FA6620-R Optical Smoke Alarm is certified to the European Standard EN 14604 and comes with a sealed, tamper proof battery that will last the lifetime of the alarm. This provides a much faster reaction to both slow smouldering and fast-flaming fires in a single alarm. Offering additional protection during the night, the extra bright light (available only with FA6611-R) offers a powerful visual beam to guide your way to safety – making it perfect for landings, hallways and bedrooms. Known as the ‘Silent Killer’, CO occurs when fuels burn incompletely, with common sources being boilers, gas fires and hobs and solid fuel burners. If you’re installing the alarm on a wall then you will need to ensure the alarm is 300mm from the nearest wall, and between 150mm and 300mm below the ceiling.