Joined in 2023 
82 
63 About this deal
Any extra connectivity? Some USB-C hubs will come with HDMI out, allowing you to connect to a monitor, provided that your PC can output video from its Type-C port. Other hubs have microSD or SD card readers built-in. I would like to use a tool that looks more like an "analyzer" that would display real time data rate transfers. One of the TB4 ports is Upstream, for connection to your computer. The other three are Downstream, for connecting other devices. Can you please explain the best testing environment setup? How to establish a solid baseline? Software used. What to use for data transfer. If you have a recent-gen iPad with a USB-C connector, you may find yourself wishing you could connect a USB Type-A device, headphones or even an external display. Anker’s 541 USB-C Hub for iPads has you covered with a unique design that’s meant to snap right into the side of your tablet or even a USB-C laptop. There’s no wire as the USB-C plug and a slight, protruding chin hold the entire metal hub in place.
Seems the more connections used the lower the speeds, how much will peripheral to peripheral transfers slow down peripheral to computer transfers.
The 4-Port USB-C Hub
For years, Caldigit ruled the Thunderbolt 3 roost with its compact but powerful Thunderbolt Station 3 Plus (TS3 Plus). Its Thunderbolt 4 successor, the Thunderbolt Station 4 (TS4) is physically and stylistically similar but boasts even more ports at even faster speeds. It matches the excellent Caldigit TS4 on port speed with 10Gbps US-A and USB-C, UHS-II SD card reader and 2.5Gb Ethernet alongside the two downstream Thunderbolt 4 ports— differing mainly by its choice of the more popular HDMI video port compared to the TS4’s DisplayPort.
Upstream connection (Type-A or Type-C?): USB hubs have multiple downstream ports to connect to your devices but only one upstream connector, which could be a port but is often a built-in wire that connects to your computer. Many laptops, including a lot of the best Ultrabooks, only have USB-C ports, so your hub's upstream connector would have to be Type-C. In addition to the SSD, the Anker PowerExpand has an HDMI out port and two USB 3.x Type-A ports that operate at 5 Gbps. There’s a USB-C power pass-through you can plug your laptop’s power adapter – up to a 100-watt unit – so that you can charge your computer while using this hub (the USB-C port does not work for data transfer; we tried). Even though two USB-C hubs may have wildly different brand names, you may sometimes find that they’re otherwise identical or just very similar. Unlike cheaper hubs, it supports a full 60Hz refresh rate over HDMI, while there’s a Gigabit Ethernet RJ-45 port for when you need a physical network connection. The Type-C and Type-A connections could be faster, with our SSD speeds limited to around 458MB/sec, but this is a great fully featured hub that’s still affordable and – most importantly – just works. Anyone who works with microcontrollers such as the Raspberry Pi Pico or any Arduino board knows that most of these devices don't have on / off switches or even reset buttons. So, if you change code and need to restart them or you just want to power them off, you often need to yank the plug in and out, a huge hassle that could damage your gear. But with the Sabrent HB-B7C3, you can just toggle power on whatever port your microcontroller is plugged into.Caldigit has sacrificed one of the TB4 ports for a dedicated DisplayPort, which is fine if you need that video port but not as flexible as leaving three downstream TB4 ports with which you can add adapters for external displays. Key specs – Upstream connection: 1x USB-C; USB ports: 3x Thunderbolt 4 USB-C 3x USB-A 3.2 Gen 2; Other ports: Gigabit Ethernet, SD Card, 3.5mm audio; Power:135W power adapter; Maximum power load: 90W per port; Dimensions: 190 x 75 x 27mm; Weight: 338g; Warranty: 12 months Unlike cheaper hubs, it supports a full 60Hz refresh rate over HDMI, while there’s a Gigabit Ethernet RJ-45 port for when you need a physical network connection. The Type-C and Type-A connections could be faster, with our SSD speeds limited to around 458MB/sec, but this is a great, fully featured hub that’s still affordable and – most importantly – it just works. We also did power testing on every powered USB hub. To see just how much electricity the ports could deliver, we connected a MakerHawk Electronic Load Tester to the hub and tried to dial up as many amps as we could. As we dial up amps on any device, the voltage drops, so a 5 volt USB port could drop down to 4 volts or less as we increase the load, but USB devices need close to 5 volts – 4.7 or 4.8 volts is usually enough – so we tested how many amps we could get at 4.8 volts and at the, likely unacceptable, rate of 4.05 volts. Similar to the Sabrent HB-U3CR, the Atolla delivered 1.2 amps at 4.8 volts on our power test and it charged our phone at 4.78 volts and 1.35 watts. The Atolla hub also offered similar performance to other hubs; we detected no slowdowns when copying files with our test SSD.
Not every USB Hub is one of the best USB hubs you can buy. We tested a number of other models that are worth considering, but not necessarily at the head of the class. It boasts four Thunderbolt 4 (all at 40Gbps bandwidth and 15W charging) and four USB-A 3.2 Gen.2 (10Gbps and 7.5W) ports. That’s more than any other Thunderbolt 4 hub we have seen or tested. Lasuney’s 10-in-1 hub (two USB 3.0 ports, two USB 2.0 ports, two HDMI 1.2 ports (4K@30Hz), DisplayPort gigabit ethernet, microSD/SD, USB-C power input) offers a lot for your money, including an unusual mix of not one, but two HDMI ports, and even a DisplayPort. Thanks to ethernet support, the hub can replace many of your wired connections. Power input is rated at 100W in, with about 87W available to the laptop.
Short of ports and crucial connections on your laptop, tablet or PC? Splash out on a USB-C hub and enjoy all the connectivity you need
Powered or not? Some USB hubs come with their own AC adapters so that they can provide more power than your computer delivers from one of its ports. Bus power from your computer can be pretty low, not enough to juice several power-hungry peripherals at once or to charge devices at a reasonable rate. By definition, a USB hub that needs its own plug isn’t very portable. All MacBooks and many of the best Ultrabooks come with only USB-C ports, and just a couple of them. That’s why there are so many portable USB hubs that connect to a computer via a built-in USB-C cable and then provide a few Type-A ports, along with some extra goodies such as an HDMI out or a card reader. Anker’s PowerExpand 4-in-1 USB-C hub has one whiz-bang feature we haven’t seen anywhere else, and that’s a built-in 256GB SSD. There are still a couple of caveats here. First, your device needs to support a DisplayPort 1.4 video output over USB-C, which will count out many Chromebooks and some MacBooks and Windows laptops. Second, the hub itself takes 15W of power, which means that – even with a 100W USB-PD charger – you may find some laptops not charging at their highest speeds. But if you’re happy to live with these compromises, this is one of the best USB-C hubs we’ve seen.
Both USB-C and Thunderbolt use the same USB-C connection. The difference is that a “generic” USB-C connection typically provides 10Gbps of bandwidth, and Thunderbolt provides 40Gbps, with a road to 120Gbps with 2024’s Thunderbolt 5.
Tired of switching plugs in and out of sockets or looking for an easier way to connect? Splash out on one of the best USB hubs to buy
Can a USB-C hub feel elegant? This one does. Anker’s 7-in-1 USB-C hub feels surprisingly weighty (3.5 ounces), with a premium metallic (aluminum and polycarbonate) sheen. It’s also a bit more expensive than its rivals. Anker’s hub was among the coolest we’ve tested under load, at about 87 degrees.
Great Deal 
New Comment