Crucial P3 Plus 4TB PCIe 3.0, 3D NAND, NVMe, M.2 SSD, up to 5000MB/s - CT4000P3PSSD8

Product Information

Capacity is a good starting point. At the moment, we're looking at some excellent 1TB, 2TB and 4TB offers. A 512GB SSD will still afford you a lot of speed storage for a boot drive, with enough space for a handful of games, depending on the size, but this capacity is a bit slim nowadays. Slightly less edifying are the P41's operating temps. At a 71°C peak, it's a little toastier than we'd ideally like. Not that we saw any signs of any thermal throttling. But temps that high is a teensy bit of a long-term reliability concern. We have tested both the original version of this drive, which had a heatsink and 96-layer flash, as well as the updated Gaming version which has a heatsink and 176-layer flash. Inland also has updated this model with that flash and now offers a 4TB capacity option, sans heatsink for all capacities. We do recommend a heatsink for heavier workloads, which can be added yourself if you don’t fancy the Gaming model of Inland’s line or need a 4TB option. The synthetic performance shows the SN770 trails more expensive drives in terms of reads, although the writes are much closer. The 4K performance is relatively impressive and shows that the SN770 has something to offer in this crowded marketplace. It's not too surprising that this drive outperforms Samsung's DRAM-less offering, as that is a PCIe 3.0 drive, after all, but the extent to which it does is impressive.

SK hynix’s Gold P31 is great if you’re looking to increase your laptop storage, not only to gain capacity but to gain battery life, too. While some drives may perform well against the Gold P31 in benchmarking, the SK hynix is much more power-efficient, which will lead to longer off-the-charger sessions. Laptop users who prioritize battery life should definitely put the new SK hynix Gold P31 at the top of their drive list. Additionally, the Gold P31's very strong write performance and ultra-high efficiency make it a well-rounded choice for many desktop users as well. I am using a Gigabyte Aorus X570 Pro Wifi mobo, which hides the second M.2 under the GPU, just a bit. That could be due to the GPU I am using, and a thinner card may have been easier. But, all in all, it was simple to install. I SUGGEST that you fill out the warranty before you install the M.2 drive. If you do the warranty before the install, you will have easy access to all the information you need. If you wait, it may not be so easy. Be sure to fill out the warranty. You could lose 4 years of warranty (potentially) if you don't.We test SSDs using a variety of synthetic benchmarks (such as CrystalDiskMark 6’s various tests) and real-world tests, including 48GB transfers that showcase how a drive performs during common tasks, and also a demanding 450GB transfer test that pushes an SSD’s cache performance to the limit. All of this leaves the minor matter of how this drive actually performs. When it comes to peak sequential throughput, the Platinum P41 is basically as fast as anything else out there, bar a few rounding errors. OK, the Samsung 990 Pro is a bit faster at 7,462MB/s for reads to the P41's 7,375MB/s. But, honestly, it's inconsequential. The same goes for writes, where almost all the top drives will do just under 6.9GB/s. Now, to reiterate an important point: A drive may come in the M.2 form factor, but that says nothing about the bus that it makes use of. Determining that is just as important as making sure it fits.

Of course, to show off the lighting, you will need to have an open-frame rig, or one with a see-through case. If you've already RGB'd your keyboard, mouse, video card, motherboard, case, and headphones, and are at a loss for what's left, the Spectrix S40G makes enough sense both in performance and looks to belong in any lighting-obsessed custom PC builder's arsenal. The earliest versions of M.2 PCI Express SSDs made use of the PCI Express Gen 2.0 x2 interface, which defines a throughput ceiling that's higher than SATA 3.0's, but not enormously so. That evolved into PCI Express Gen 3.0 x2 and x4, paired with a technology called Non-Volatile Memory Express (NVMe) to propel performance even further, especially with heavy, deeply queued workloads.

That's not a bad thing. Especially in the case of laptops, an older machine might support only M.2 SATA-bus SSDs, and that will be the boundary of your upgrade path...end of story. As a result, the only reasons you'd upgrade the drive, in that situation, would be to get more capacity, or if the old one failed.