Cable Tester, Coax Explorer 2 VDV Tester, Push Button Operation for Wire Tracing, Testing and Mapping Coaxial Cable, Klein Tools VDV512-100

Product Information

If the light turns green, there is a valid coaxial signal. The coaxial tester looks for a particular frequency for a valid internet signal. If the light turns red, it denotes an inactive outlet or malfunctioning coaxial cable. Using a Modem to Test Cable Outlet One of the main things I like about this line tester is that it features an easy-to-read LED indicator display with markings that correspond to the connection test result. I assure you that it won’t be a problem fixing and analyzing connections with this tester because of this feature. If you have access to a cable tester that can identify the location of damage, connect your cable to the tester and run the test. Additionally, I like that this professional cable tester can easily detect the most common wiring errors consistently. Prominently, the tester can detect split pairs effortlessly. This feature is beneficial for workers that are always assigned to network cabling projects. Additionally, one of the features that I especially love about this network testor is that users can also operate it at higher altitudes. Capable of performing the job at a maximum altitude of under 2 km, this tester is a testament to the engineering ingenuity that came into designing this product.

Connect the positive end of the multimeter probe to the center wire/pin at the other side of coax. Same precautions should be taken as you took with the positive tip. But do note that these are only the general directions in using a network tester. Refer to the manual of your device for a more comprehensive and knowledgeable explanation. Where to Buy Network Cable Testers Upon inquiring with my colleagues regarding a dependable network cable tester, they aptly recommended me Klein Tools’ product. Thus, I also wholly endorse this cable gadget among the pile of networking testers flooding the market. Now, the coaxial cable tester you choose determines how you interpret results. The DSS-01 gives you a green light if the cable is okay and supplies the right signal frequency.Gather the necessary tools, such as a continuity tester and explorer for the coax and masking tape to mark the coax cable path. Using the DSS-01 coax cable tester helps you save time. If you don’t have one, however, you may also use your modem. Testing A Coax Cable With A Modem However, the problem with these simple displays is that they don’t adequately show the exact numerical values and other essential testing units.

For instance, the tester boasts utmost compatibility with common cable types. I can connect Coax, RJ11, RJ45, and CAT cables without the need for adapters. This feature is useful for workers regularly exposed to a variety of cable types in their workplace.Another way to minimize physical damage is to invest in a high-grade coaxial cable. The multiple layering and shields offer more protection against physical damage and interference. How to Test Coax Cable without Multimeter? Essentially, network cable testers help in further optimizing the overall connection performance. What is a Level 3 Cable Tester If you have multiple coaxial signal cables connected via a cable splitter, especially when they’re in the wall, you should match the ends of a particular coax cable. Using a coaxial cable tester, you can perform this task easily. Now, what I like about this cable tester is its ability to work with extreme temperatures. The tester can optimally perform from 0°C to 40 °C without any trouble. Likewise, you can safely store the network tester in either cold or hot environments (at a staggering -10°C – 50 °C) without it malfunctioning. If you have lost the coaxial cable in the wall or attic, then you can take help of a coaxial toner probe to trace down the cable. When it finds the coaxial cable inside the wall, it will generate a loud noise and you can easily identify the location of the cable.

Cable types/ Compatibility – From the internet to CCTV cameras, numerous connections use coaxial cable. Most of such cables used in these connections are RG59, RG11, and RG6 types. Before buying a tester, you should the types of cables you will be working with and if that tester is incompatible with such wires. In case you don’t have any of the tools handy, you can still figure out and tell if the coax cable is bad. Curious to know how? Suppose you’re in the work field of electronics and are regularly exposed to wires and cord connections. In that case, I recommend that you get a cable tester that’s fully compatible with almost every cable type. For efficient tracing and testing of a coaxial cable, consider using a standard tool like the Klein Tools VDV501-851 Coaxial Cable Explorer & Tester. The device can also securely adjudge the strength and connectivity of LAN, RJ45, RJ11, and RJ12 cables. This cross-compatibility with other wires makes it an excellent tester capable of performing scans with reliable results.While the device may seem simple, it can still perform multiple cable connection tests reliably. For instance, you can efficiently perform continuity and pairing tests with this device without any trouble. Yet another reason why I wholly recommend this product to consumers looking for a performance-oriented tester.