Joined in 2023 
82 
63 About this deal
The joint material must not be used in the joint directly against a plinth or other masonry. Use neutral joint filling sand here, as otherwise there is a risk of efflorescence or peeling
The ultimate goal is to AID water flow towards the house which has ACO drains around the edge to run the water away rather than have it spill into the gaps and into the ground around the house, missing the drains.
Similar products
To avoid weeds and displacements in the paving, the joint must always be filled to the full height of the joint edge and be completely free of soil and other organic material. The paving is cleaned with a stiff broom and the joints are refilled as needed. Moss and algae can be removed by suitable means. Extreme weather conditions can cause white deposits (efflorescence) in the joints and on the edges of the paving stones. However, they are usually washed off at the next rain shower. The deposits can also be removed by regular cleaning of the stones. It is therefore important that you filled your joints in a height of 4 cm when you first applied DANSAND® NO GROW™ in 2021. Likewise, it is important that you have are maintaining your joints on a regular basis, making sure that they are always completely filled.
NatWest, RBS and Ulster Bank to close at least 172 branches in 2023/24 – here's the full list, plus alternatives Both employees and self-employed workers will pay less in National Insurance from next year, Chancellor Jeremy Hunt has announced in today's Autumn Statement. DANSAND® filling sand is not a remedy for weeds. To prevent existing weeds from growing, all weeds – including weed roots – must be removed before refilling the joints. Clean the joint to a depth corresponding to the entire height of the stone. This is done using a joint cleaner. You can also use a high-pressure cleaner, but be careful not to damage the paving stones or the sublayer. Top up the joint. We have added a mineral additive to DANSAND ® joint filling sand, DANSAND ® Stone dust and DANSAND Kerama ®. The mineral has a naturally high pH value, which creates a nutrient-poor environment in your joints. The weed seeds dry out and can neither take root nor germinate.we are sorry to learn that you had a bad experience using DANSAND® NO GROW™. As we understand, you applied NO GROW in 2021. However, you do not specify which exact NO GROW product you were using. In the below answer, we will be assuming that you have used DANSAND® NO GROW™ Joint Filling Sand. Sure, you may need to re-sand the joints every two years as the vibrations from cars or heavy footfall may loosen them over time, but with such a simple brush in application, you’ll have this job done in no time at all! Value for money
There’s also the benefit of Dansand No Grow’s natural weed-preventing abilities to account for, meaning you won’t need to fork out on a coat of patio sealer to fully protect your paving from unwanted organic pests and moss growth. Environmentally friendly
MSE News
Martin Lewis: What the Autumn Statement means for you – including wages, benefits, pensions, ISAs, national insurance and more Autumn Statement: State pension confirmed to rise by 8.5% from April 2024 – while some benefits will go up by 6.7% At Dansand, we are very committed to producing environmentally friendly alternatives that support sustainable progress. In our product range you will find, for example, a number of products that promote sensible management of water resources. However, sand for water purification is only a small part of the many purposes that our more than 20 different sorts constitute.
This allows for targeted protection only from unwanted plant life, with the surrounding flowers and bushes in your garden and around your paving installation completely free from environmentally unsafe chemicals or growth-inhibiting compounds. Problems Over the years, we have established ourselves as the market’s preferred supplier of sand in the professional and private market. We are specialists in sand. In fact, we are so specialised that we also produce sand according to specifications so that it gets the exact grain curve that our customers demand. For new and existing paved surfaces of concrete and natural stone. Only to be used for outdoor use on a dry surface. Only suitable for an unbound base layer. Suitable for private use. Estimated consumption: 20 kg for approximately 5-10 m 2. For 14x21x5 cm paving stones with a joint width of 2–3 mm = 2.0 kg / m 2. Our coverage calculator helps you calculate the consumption of joint filling material. The filling depth must be at least 40 mm. The joint width must vary between 1-5 mm. We offer a large selection of products that consist of either pure sand or sand enriched with various nutrients and minerals. Here you will find products for construction, industry, sports facilities, playgrounds and for the do-it-yourself people. The NO GROW mixture consists of washed and dried silica sand as well as nutrient-poor minerals with a high pH value. The high pH value causes weed seeds to dry out so that they cannot take root and germinate – in a completely natural way. The minerals dissolve slowly and can only be washed out after 10 years of rain. With the correct use of DANSAND ® joint filling sand, you get a great result that lasts for many years.Martin Lewis: What the Autumn Statement means for you – including wages, benefits, pensions, ISAs, housing, national insurance and more Autumn Statement: Workers to pay less in national insurance – but rate cuts don't offset the freezing of personal tax thresholds We recommend a joint height of min. 4 cm when filling your joints to ensure that the roots of the seed do not have enough time to find nourishment, as it will dry out before then. For the material to work properly, the joint must be made correctly. A properly executed joint is at least 3 mm wide , well-compressed and completely filled to the edge or bevel of the stone.
Great Deal 
New Comment