Trend T14 1/2 Inch Variable Speed Workshop Router, Perfect for Hand-Held & Router Table Use, 2300W, 240V, Black, T14EK

Product Information

Ergonomic Inclined Handles support a natural wrist position, reduce strain, and increase control when routing with arms outstretched. Some machines may also allow you to adjust the orientation of their handles for maximum comfort. D shaped main handles are easy to use and make the router very controllable, but this arrangement tends to be restricted to fixed base routers only. There is some debate as to the positioning of the side handles. Having them low down on the router body gives you much better control for hand work, but in this position they may possibly interfere if you start using the router along a straightedge or in some jigs. Precision Aluminium Fence Extrusion with a wide base, ensures perfect squareness of the facings to the table for accurate routing.

Trend Base Configuration (TBC) features 3 screw holes for easy, direct mounting of Trend and other compatible routers. Micrometer Fine Height Adjuster features 0.1mm increments and an easy-to-read display for precision depth adjustment Micro-Adjustable Side Fence with adjustable facings and 0.1mm increments for accurate edge rebating, grooving and mouldingThis category covers the input range between 400 and 750 watts, and their lower power restricts these routers to 1/4” collets. Precision Centring System features a unique guide bush centring pin and adaptor plate that ensures perfect concentricity between cutter and guide bush for pinpoint accuracy with routing jigs. Many light duty routers have a removable plunge base which allows the motor to be used separately, or for fitting into a drill press for overhead routing and drilling applications.

Top-Mount Cyclone Extraction with enhanced dust adapter efficiently clears debris to give users 360° visibility and prevent extraction hoses from ‘snagging’. Trend Base Configuration (TBC) features 3 screw holes for easy, direct mounting of Trend T8, Trend T11, Trend T14 and other compatible routers. Level Variable Speed Control ranges from 9,000 to 22,000rpm, giving the user total control across a range of cutters, materials, and applications Micrometer Fine Height Adjuster features 0.1mm increments and an easy-to-read display for precision depth adjustment.

Lead-On Starter Pin for safe templating and curved work with bearing guided cutters and is stored on the fence for safe keeping. in-1 Plunge and Router Table Height Adjuster can be used from above AND below the router, in both table and hand-held mode. Each 360° turn gives 1.0mm adjustment The plastic sub-base should be replaceable as it will inevitably wear or chip, and as it is the datum of the whole routing process, it must be in good condition at all times. Integrated Router Rest provides users with a safe way of changing cutters whilst preventing debris from entering motor vents

Electronic full wave variable control of spindle speed under load for a fine finish on all types of material. in-1 Plunge & Router Table Height Adjuster can be used from above AND below the router, in both table and hand-held mode. Each 360° turn gives 1.5mm adjustment. Anti-Scratch Base Plate made from replaceable, smooth Phenolic materials for a low-friction routing experience. Precision Aluminium Extrusion with a wide base, ensures perfect squareness of the fence facings to the table for accurate routing.Router Table Safety Switch bypasses the Automatic Power Shut Off feature and replaces the need for a typical NVR (No Volt Release) switch. Router Table Safety Switch bypasses the Automatic Power Shut Off feature and replaces the need for a typical NVR (No Volt Release) switch Micro-adjustable Side Fence with adjustable facings for accurate edge rebating, grooving and moulding

Router Table Safety Switch bypasses the Anti-Restart Protection feature and replaces the need for a typical NVR (No Volt Release) switch. The T12’s ergonomic design and weight-balance also make it ideal for hand-held routing tasks, such as edge moulding applications, including precision-matched recesses for intumescent fire door strips and rebates. To maximise the potential of the router, we offer a range of accessories for the professional user and craftsperson.Extra-Wide 75mm Base Aperture to accommodate over-size cutters, such as panel raisers, when used with a Router Table. Top-Mount Cyclone Extraction will efficiently clear debris to allow 360° visibility and prevent extraction hoses from ‘snagging’ position revolving depth stop for fast adjustable settings. Adjustable inner plate for guide bush accuracy. Top Tape Scale with metric & imperial graduations for stopped cuts and repeat settings with WRT/2 (not supplied). Trend Base Configuration features a unique precision guide bush centring device to ensure perfect concentricity between cutter and collet for pinpoint accuracy when used with Trend routing jigs