TP-Link Deco X50 AX3000 Whole Home AI-Driven Mesh Wi-Fi 6 System, Dual-Band with Gigabit Ports, Coverage up to 6,500 ft2, Connect up to 150 devices, 1 GHz Dual-Core CPU, HomeShield Security, Pack of 3

Product Information

IEEE Standard 802.11. Действителната пропускателна способност на безжичните данни и безжичното покритие, както и количеството свързани устройства не са гарантирани и ще варират в резултат на мрежовите условия, ограниченията на клиента и фактори на околната среда, включително строителни материали, препятствия, обем и плътност на трафика и местоположение на клиента. Gigabit internet speeds require compatible service plans and equipment. All WAN/LAN ports will operate as either WAN or LAN ports. Only one port can serve as a WAN port at a time.

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty. Open Source Code For Programmers (GPL) Why the actual wireless speed on my wireless device is lower than the speed result on the Deco APP? 08-02-2022 165922v/r и може да изискват допълнителна настройка. Производителността може да варира в зависимост от клиентското устройство. The Deco app also works as a smart-home hub, offering one-touch controls for TP-Link’s Kasa appliances, plus integrations with Philips Hue and Samsung SmartThings. I suspect most people already have this covered through the Alexa or Google Home apps but the simple automations could be useful, allowing you to set network events as triggers for IoT actions.

Acutual DSL downlink speeds vary between households. Factors affecting DSL speeds include the internet service level, real-time network capacity, equipment and client limitations, environmental factors. To test the X50’s performance, I set up the system in my own home, with one node connected to the main internet line in the study and the other two in the adjoining bedroom and downstairs living room. Then I connected a laptop to the 5GHz network, carried it around various rooms and measured read and write speeds to an Asustor Drivestor 4 Pro NAS appliance connected to one of the gigabit Ethernet ports on the primary Deco station.Use of WiFi 6 and other features including OFDMA, MU-MIMO, 1024-QAM, HE160 and BSS Color require clients to also support the corresponding features. The 160 MHz bandwidth may be unavailable in the 5 GHz band in some regions/countries due to regulatory restrictions. Troubleshooting Guide of DDNS function on TP-Link Wi-Fi Router, LTE Gateway Router or Deco Router 06-20-2023 26964 Use of Wi-Fi 6 and other features including OFDMA, MU-MIMO, 1024-QAM, and BSS Color require clients to also support the corresponding features. Protection against lightning and electro-static discharge may be achieved through proper product setup, grounding and cable shielding. Refer to the instruction manual and consult an IT professional to assist with setting up this product.

All WAN/LAN ports will operate as either WAN or LAN ports. Only one port can serve as a WAN port at a time. The internet connection is unstable or suddenly stops working when connected to the Deco network? 07-12-2023 851855 And the Deco design has its strengths. Upload speeds aren’t bad at all, while the HomeShield and smart appliance integrations add usefulness. Three Ethernet ports per unit is a welcome provision too. Here are the speeds I saw, along with those achieved in the same tests by some of the rival meshes mentioned above:Leert op intelligente wijze de netwerkomgeving te herkennen om wifi te bieden die is afgestemd op je woning To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device. Clients need to support 802.11k/v/r and may require additional set up. Performance may vary depending on the client device. Insights) можете да проверявате кои сайтове посещават вашите деца и колко време прекарват във всеки от тях. Това е чудесен начин да знаете, че вашите деца са в безопасност и че се забавлявай онлайн. The TP-Link Deco X50-5G is an AX3000 Wi-Fi 6 system. Its 5GHz band runs at a maximum speed of 2402Mbit/s and its 2.4GHz band at a maximum of 574Mbit/s. That’s relatively mid-range by today’s standards.