Zinsser Perma White Self-Priming Interior Paint Matt White 2.5L

Product Information

If product has dried on application tool, soak it overnight in a solution of equal parts household ammonia and water. Follow manufacturer’s instructions when cleaning spray equipment. Use Zinsser BIN Brush Cleaner to removed dried paint from brushes PermaWhite® Interior Satin - A scrubbable, satin finish recommended for high-humidity areas that are subject to challenging wear and tear. Ideal for bathrooms and laundry rooms. Apply evenly and consistently, using a good quality synthetic bristle brush, microfibre roller, applicator pad or spray gun (Use tip size 0.017 at pressure 2000 - 2600 psi)

Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour If thinning is necessary (such as with conventional sprayer applications), use only water and no more than 10% by volume Further safety information can be found in the safety data sheets available in the attachements section above. So use only the exterior perms white, get it working good, put it on heavy and Longstroke it as you go. Its gorgeous!!!. PermaWhite® Interior Matt - Recommended for application in high-humidity areas where a durable, low sheen finish is desired such as finished basements and kitchens.Soluble in the following materials: cold water and hot water. Very slightly soluble in the following materials: methanol and acetone. Tintable to any colour - Zinsser Perma White Mould Resisting Paint available in both matt, and satin finishes Zinsser Perma White Mould Resisting Paint is formulated to resist mould and mildew for up to seven years

We also deliver to the majority of non mainland UK locations including The scottish Highlands & islands, Isle of Man, Isle of Wight, Isles of Scilly and Northern Ireland. Please see full delivery terms for the extra charges associated with these locations Satin: Once dried the paint film is classed as a treated article and contains the surface biocide 4,5-dichloro-2-n-octyl-4-isothiazolin-3-one 0.12% by weight. Numerous firsts in the industry were introduced by Zinsser, including Zinsser Perma-White®, the first mould- and damp-proof paint, Bulls Eye® 1-2-3, the first water-based universal primer, and Zinsser B-I-N®, the first shellac-based primer-sealer. A water-based primer that delivers performance previously only seen in solvent-based primers, Bulls-Eye 123 Plus was also introduced by Zinsser, demonstrating their continued commitment to innovation.

1 Litre White

P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P103 Read carefully and follow all instructions.P261 Avoid breathing dust/fume/gas/mist/vapours/ spray.P280 Wear protective gloves/protective clothing/eye protection/face protection.P273 Avoid release to the environment.P302 + P352 IF ON SKIN: Wash with plenty of water/…P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.P501 Dispose of contents/container to … Zinsser Perma-White Interior will bond to existing paints, either solvent-based or glossy paints. It will even bond to ceramic tiling and Formica without sanding. The paint contains a biocide that serveas a protective shield against fungal degradation. Due to these protective properties against mould and mildew and as a moisture resistant paint, Zinsser Perma-White paint is ideally suited for areas with persistent humidity and poor air circulation, such as bathrooms, basements or laundry rooms. Zinsser guarantees protection against fungal degradation for 7 years.

When priming over stained areas, first attempt to remove as much of the stain as possible by washing, sanding, scraping, etc. NOTE: Minimise the use of the shower, avoid high levels of steam and condensation for the first week after applying the Perma-White, this is to allow it to fully harden and reach full moisture resistance, otherwise the coating may be damaged if it is subjected to condensation and water vapour while it is still curing. Finally apply 2 coats of Zinsser Perma-White Interior Satin. This is a great product for bathrooms and areas of high humidity. It can also be mixed to a wide range of colours.Warning: If you scrape, sand, or remove old paint, you may release lead dust. Special precautions should be taken during the surface preparation of pre 1960’s paint surfaces over wood and metal as they may contain harmful lead. When dry-sanding avoid dust inhalation by wearing a suitable protective face mask. To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options. If you call yourself a professional and you can’t get s good results then maybe you aren’t as good as you think Reply Due to its expert technical knowledge of the technologies and materials available across the industry, Promain has a reputation for outstanding service among its trade and retail customers.

Self-priming - adheres to glossy surfaces without sanding. Porous surfaces, such as bare plaster, must first be primed to satisfy their porosity (i.e. with Zinsser Bulls Eye 123). Zinsser Perma White Mould Resisting Paint, a water-based self-priming acrylic paint, is a speciality paint formulated to resist mould and mildew for up to years. It forms a finish that is unaffected by moisture that weakens ordinary paint films, causing blistering and peeling as well as unsightly mildew. When used in bathrooms, allow 24 hours to fully dry before subjecting surfaces to steam and moistureThis is a common problem. It is likely the paint used previously is allowing moisture through to the plaster walls and ceiling causing the flaking, i.e. loss of adhesion. During winter the plaster has been absorbing moisture leading to the flaking problem. The ceiling will need to completely dry out before any painting is carried out. Leaving windows and the bathroom door open as much as possible, minimising use of the shower etc will help speed up the drying out process. With outstanding adhesion and a washable surface this product is self-priming, fast drying and ready to recoat in 2 hours. It is formulated to withstand extreme humid conditions and mildew prone areas. If the surface is not clean or has wax (candles burning) and plug in deodorizes, hairspray (bathrooms) bugspray/any sprays, dirt, oil/ grease( kitchens) and body oils from hands etc.. then paint will“fisheye” and Bubble.. NOTE: Perma-White® is formulated with a mildewcide approved for paint use and does not contain mercury or lead compounds.