New Door Restore | Restore Colour and Appearance of Faded Composite uPVC Doors | 250ml

Product Information

Dropped hinges are perfectly normal and will still occur even with regular maintenance. Fortunately, this is a problem that you can simply and easily fix yourself. Once the door has completely dried (which should take approximately 24 hours), you can apply the oils you need to lubricate the door’s metal parts. If you’ve been affected in this way, take a look at our top tips – they might provide you with a simple solution to the issue! Warping, bowing or swelling

Maintenance is due when a Polytrol treated surfaces shows signs of fading. Prepare and re-treat surfaces as directed above. Clean Up For the final step, you should use beeswax or another similar product to give your newly painted door a protective layer for the materials and a professional finish. The most effective method for identifying and treating draught problems is to take a closer look at your door. You might be able to take fix it yourself with some care and attention, but in other cases, a professional will need to assist. After cleaning, leave the door to dry for 24 hours before applying Polytrol. Make sure that your door is completely dry before moving on to the next step! 2. Apply the Polytrol

187 reviews for Polytrol

Watertight and weatherproof: The doors are airtight and have secondary seals to keep all and any water and air out. Not much can get past these doors.

Some installers use WD40 to help give the door that extra shine; however, the effect will not last for long and, in the end, will not do any significant damage, but it will not do much good either. Apply Polytrol using a fine wire wool (000 grade) soaked in Polytrol and allow it to work for 10-20 minutes. Wipe off any excess Polytrol with a clean lint-free cloth. Leave to dry. Whereas some people will tell you that oil-based paints work best, others will argue that solvent paints are best.In the unlikely event that you suffer a problem, either because of a manufacturing fault or general everyday use, we will aim to resolve it promptly. Simple to apply using a cloth or soft brush, it’s ready to wipe off in just 10 minutes! It can be used on both horizontal and vertical surfaces and can even be used on fibreglass (GRP). Polytrol dries to a tough and long-lasting flexible finish which does not leave a film – so it won’t peel or flake. If the door is particularly dirty you might want to consider using a cleaning product such as Owatrol Net-Trol. Or for the removal of mildew you may want to use something such as a 50:50 bleach and water solution. When using the Polytrol 250ml spray can, simply spray on liberally, wipe off any excess and leave to dry. Applying Polytrol to plastic, gelcoat, tiles, painted surfaces etc.