GYEON Q2M Ceramic Detailer 500ml

Product Information

It is typically applied by hand and easily bonds to the paint, creating a hydrophobic layer of protection around it. Ease of use and convenience is a strength of Gyeon Ceramic Detailer. Whether you spritz the product on a panel or on the towel, the application is self-explanatory. I would recommend one spritz on a towel to start, depending on your preference 2 – 3 following sprays on a small to medium size car panel. Spread the product on the car with a microfiber towel folded into 8 sides. Then take a dry side of the microfiber towel for the final wipe. You can use this after washing or as a drying aid. The Eagle Edgeless 500 Light Grey microfiber towel was used (pictured below). The best quality nano-ceramic coating jobs require a professional team to apply the material, so you’ll need to tote your wheels down to the local paint shop and prepare to dig deep. However, with a growing number of ceramic detailing sprays appearing on the DIY detailing market, there’s no reason why you can’t take the challenge on at home. A ceramic coat will prevent the contaminants from bonding with the paint. Additionally, with the air pollution rate slowly rising in the world, a good ceramic coat can be a great relief. Makes Your Car Easy To Clean A ceramic coating makes your life stress-free, as the polymer will not wear off. Not only does the coating blend with your car’s paint, but it also repels water, which means that water-based grime and dirt are not possible, they slide off the ceramic coating pretty easily. Provides A Candy-Like Gloss Protective Coating For Cars

Spray Gyeon Ceramic Detailer onto a dedicated, wheel only microfiber towel, wipe over each alloy wheel face and buff, to add protection and make subsequent wheel cleaning easier. Gyeon q2m Ceramic Detailer spray Boosts Hydrophobicity and gloss Benefits of UsingGyeon Q2M Ceramic Detailer Spray

GYEON - Q²M QuickDetailer Reviews

Wash your car with a pure shampoo first. Then with paintwork and panels clean and wet, apply one or two pump from the bottle to a clean, wet wash mitt. Apply the undiluted Bathe+ to each panel, in a similar fashion to washing the car. Begin by removing all the dirt, grime and other contaminants from your car’s surface. Any particulates left on the surface of the clear coat will impede the bonding ability of the polymers, so clean and dry the surface of each panel before applying for the best quality results. Hydrophobic Marvel: The hydrophobic properties of ceramic coatings are further elevated with Q²M CeramicDetailer. This maintenance spray adds a boost to the hydrophobic effect, enhancing water behavior and ensuring your vehicle remains a vision of excellence. Both sizes of trigger spray bottles sit comfortably in the hand. The triggers themselves require just the right amount of pressure to achieve a consistent spray pattern during use. Conclusion

Thoroughly rinse the product residue off the car. Make sure to rinse the car immediately. Do not let the car soap mixture dry on the car and do not use this product on hot panels, or in direct sunlight.If you’re worried about the Bathe+ car soap drying on the panels, rinse each panel immediately after washing. This is what all car owners love about ceramic coating for cars! That candy-like gloss protection. The ceramic coating will provide a deep glossy look that brings out the best of any paint job. Once the ceramics have been sprayed onto the clear coat surface, use a clean microfibre towel to gently rub it into the bodywork, applying light pressure in small circular motions around the panel until the entire surface has been covered. Working one panel at a time, gently and carefully spread the product across the entire panel using the microfiber. Flip the towel to a dry side, or use a fresh, dry microfiber towel, to buff the product to a high shine. Ease of Application of Gyeon Q²M Ceramic Detailer

How to apply a ceramic detailing spray

When using Gyeon Bathe+ on an uncoated car, our experience suggests that 2-3 weeks of durability is more realistic. The durability of any protective product can vary, so your mileage may vary. Value for money of Gyeon Q²M Bathe+ The third and final way to useGyeon Bathe Plus car shampoo is by applying it directly to the paintwork with a microfiber wash mitt. Incorporate Q²M CeramicDetailer into your maintenance arsenal and witness the transformation it brings to your ceramic-coated vehicle. As each mist graces your car's surface, embrace the marriage of elegance and innovation, and experience the convenience of a product that transcends conventional boundaries.