Andonstar AD407 3D HDMI Soldering Digital Microscope with 4MP UHD and 7 inch Adjustable LCD Screen USB Electronic Video Microscopes for Phone Repairing, Circuit Board, SMT SMD DIY

Product Information

Short press the M button to switch between different modes “Video and image”. The same thing you can do by pressing the Mode button on the remote controller. If you have watched my video while testing this digital microscope, you might have noticed, when I press the buttons on the monitor it shakes a lot, so to avoid this you can use the remote controller. The box also contains a set of spring-loaded PCB clamps that you can attach to the base. These aren’t mentioned anywhere in the assembly instructions or manual. You can install them as follows: If you don’t have a microscope, you can get some use out of your phone. Or, go shopping for — no kidding — ear wax cameras.

ad407) for PCB Looking for a digital microscope (ad207 vs ad407) for PCB

We also liked that the scope has a remote control so you can operate it without touching it. We’ve used scopes where pushing the buttons to do things like snap a photo sometimes causes vibrations or worse when you are trying to focus on something specific. This is simply amazing, this tiny component as compared to my cell phone is now of the size of a cell phone or even larger, I can clearly see each and every detail. I don’t see any prominent noise. But, if in case you see any noise then you can reduce the situration and contrast values on your TV and it will completely remove the noise. Anyway, using the zoom in and zoom out buttons on the remote controller, you can further increase enlarge the subject. If you are looking to buy a digital microscope with built-in screen, you might be wondering whether the Andonstar AD407 is a better option than the ADSM302. They are similar microscopes, but have a number of key differences. Benefits of the AD407 If you want to take images or videos for later use, you can store them on a (non-included) SD card. This is done automatically when you press any of the record buttons on the remote or microscope. Photos

Customer reviews

This change of mind return policy is in addition to, and does not affect your rights under the Australian Consumer Law including any rights you may have in respect of faulty items. To return faulty items see our Returning Faulty Items policy. The included remote is useful for making a photo (or video) without touching the buttons under the LCD screen. Using the buttons can cause movement, resulting in a blurry image. By using the remote you will not have this problem. I am not sure if this is officially recommended, as the manual doesn’t mention anything about it, but I have found it to work just fine. Die Tiefenschrärfe ist gut und bei der stärksten Vergrösserung hat der focuspunkt immer noch 5cm Abstand vom No-Name-30mm-Schutzglas. It is convenient for you to operate from a long distance and supports functions such as image discoloration and digital zoom. It is especially suitable for demonstrations and other scenes. Easily take photos and videos, and avoid the shake that affects the picture quality caused by pressing the screen buttons.

Andonstar Digital Microscope | Best Tool for PCB Soldering Andonstar Digital Microscope | Best Tool for PCB Soldering

After this, you only have to plug in the cables, tear the protective film off of the LCD, and you are ready to go.

The quality of the photos is okay. They tend to be less sharp and more noisy than what you actually see on the built-in screen. For each height you can set the lens to (focus distance), there is a specific size area (field of view) visible on the microscope LCD screen. I have listed them below, so that you can get an idea of how big of an area you can view at once under the microscope. Height One downside of the remote is that (at least on my unit) I need to point the remote exactly at the IR receiver for it to work. So occasionally I need to re-aim and press the button again if nothing happens. UV Filter

Andonstar AD407 3D HDMI Soldering Digital Microscope with 4MP

In terms of brightness, there is nothing to complain about either. With the default settings, objects under the lens are clearly visible on the screen. This is the Power cable, plug in the USB in the Microscope Monitor USB interface. Use the Spotlight interface on the power cable to power up the LEDs.First, plug in the USB into this AC to DC adaptor to supply the required voltage.Press the power button to turn On the Spotlights and the Microscope Monitor anduse these + and – buttons to increase and decrease the brightness. Levels Adjustable LED Lights】2 metal base plate side lights, a total of 8 intensity levels of LED lights, the light body can be bent and the angle can be adjusted, which can meet your different requirements for image brightness and lighting angle to get the best image effect. All in all, I would say that the improved features of the AD407 are worth the extra cost compared to the ADSM302. Final Verdict: Should You Buy the Andonstar AD407? Insgesamt ganz zufriedenstellend für einen Basteler, aber die Preise für stereo oder sogar Triangular Mikroscope liegen inzwischen nur noch beim Doppelten dieses hier, aber Inkl. Zoom und Boom/Beam halter und halt 2 Optiken, was das Löten vereinfacht, aber nicht gut für die Wirbelsäule ist.With the base, you get two optional clamps that you can use to hold circuit boards in place. I do not find myself using them much, because they restrict the size of the horizontal work area. These features do come at a cost however, as the AD407 is about 20-25% more expensive than the ADSM302. Benefits of the ADSM302

AD409 Microscope Review | Hackaday AD409 Microscope Review | Hackaday

Ultra-high definition 2160P Video Record, 7-inch IPS screen while supporting HDMI output, microscope screen and HDMI screen can display simultaneously that allows you to see a more microscopic world and free your eyes all the time.

With the lens raised to the top of the arm, there is about 80 mm of working space between the lens and the stand. From that, you will also have to subtract the height of the circuit board or whatever else you are working on. The screen is probably the most valuable asset of this digital microscope. With its 7″ diagonal it is larger than the screen of the ADSM302 , which has a 5″ screen. The 7″ screen makes it easy to see small details. Andonstar AD407 Pro 3D HDMI Soldering Digital Microscope Review and Testing-Today, I am going to review and test the Andonstar AD407 Pro 3D HDMI Soldering Digital Microscope. So, let’s go ahead and start the unboxing and see what’s in the box.