Joined in 2023 
82 
63 About this deal
Whilst the 1.2-ohm is likely to give you the best vaping experience possible with this kit, the 0.8-ohm coil included in the set is also fairly effective, especially at higher wattages.
For deliveries to the Scottish Highlands, Scottish Islands, Northern Ireland, Isle of Man, Scilly Isles, Isle of Wight & Jersey, please allow 2 to 5 days. Saturday and Sunday delivery is also not available in the areas listed above Please try opening up your airflow more. The more airflow that passes through the coil, the cooler the coil will be, and the less likely you will get a burnt taste.
Restrictions
After I spent a few minutes admiring the elegance of the mod, I turned my attention to the Zlide 22 tank.Visually it’s very impressive and well engineered, the caged design protects the glass from accidents and the slide top looks and functions really well.The AFC (Airflow Control) protrudes ever so slightly which makes it so much easier to adjust when it’s on the mod (a very nice touch). The coolfire Z50 is a kit that keeps up with its user: even as your vaping preferences change over time, the Coolfire will still deliver a highly enjoyable vaping experience. The airflow is easily adjusted, providing you with the best possible flavour and mouth-to-lung hit. What’s more, the power output can also be adjusted for a truly fine tuned vaping experience.
If you’ve tried the tips above and your battery is not charging properly, you have a faulty battery. Innokin have always seemed to market their devices at the beginner vaper and the Coolfire Z50 Kit is no exception as the Zlide tank is obviously created for the MTL vape audience. The finish and design of the tank fit seamlessly with the device and creates a rather appealing yet bulky MTL device. Please try to vape at an appropriately high wattage which is recommended on the coil during vaping. It may encounter thespittingissue if the liquid on the coil hasn't been atomized on time with low wattage.
The Innokin Coolfire Z50 Zlide kit combines the Z50 mod and the Zlide tank for an intuitive and easy-to-use kit suitable for both Mouth-to-Lung and restricted Direct-Lung vaping. Use a certified wall charger with a high quality microUSB cable. Monitor the device and verify that it is charging. Wait until the device is fully charged. Note: All batteries have a limited number of full charge cycles. A battery capacity may decrease based on charging and use over time. Note: Make sure that the device’s battery always has some amount of charge/power. Do not store a device with an empty battery as it may damage the overall lifespan of the battery.
The resistance of an atomizer coil is the amount of heat produced by the coil based on the battery voltage and wattage setting. The coil resistance should be printed on the side of the coil. Higher resistance coils tend to require less wattage, and low resistance “sub-ohm” (>0.9ohm) coils tend to require more wattage to produce vapor. Please try to vape at an appropriately high wattage which is recommended on the coil during vaping. It may encounter the leaking issue if the liquid on the coil hasn't been atomized on time with low wattage.
Standard Delivery
Tighten up your airflow. On the 1.2ohm coil especially, if the airflow is set closer to the "RDL" section, this will result in spotty auto-draw functionality. Filling the Innokin Zlide tank is easier and mess free thanks to the sliding top-fill mechanism. The tank is comnpatible with a wide range of coils, and has adjustable airflow, allowing users to create a fully personalised vaping experience.
The tank itself comes apart very easily and everything appears as well built as the device. This makes changing the coil easy too and with smooth strong feeling threads there is little chance of threading the tank. At 18W I found the flavours became merged together and created a much warmer vape, especially when compared to the other coil Innokin provide straight out the box. Surprisingly, it was right in the middle around 17W that I found the sweet spot on the 0.8ohm coil. At this setting with the airflow at half, I got a really pleasant MTL vape with the full flavour profile of The Salt Stuff flavours merging really well together. Final ThoughtsYou will then be asked to verify your details by a number of means; Mobile Phone, Credit Card, Debit Card, UK Driving Licence, Citizencard, National DB or Electoral Roll. The recommended wattage for the 0.8ohm coil is between 15W - 18W. As highlighted before, I really do prefer a warmer vape and this really did deliver. Starting at the lower end of 15W with the same Watermelon Strawberry Bubblegum nic salts by The Salt Stuff, the flavour was much more there than on the 1.2ohm coil, with signs of improvement.
Great Deal 
New Comment