Fast Fit L SHAPE/SHAPED HEAVY DUTY STAINLESS STEEL TOILET SEAT HINGE. WITH NON SLIP FITTINGS/FIXINGS, FOR PLASTIC/NOVELTY TOILET SEATS.

Product Information

When replacing a toilet seat you have to be absolutely sure that you are replacing the old one with one of exactly the same size so that all supports on the base of the ring sit flat on top of the pan Square: Arguably the most modern type of toilet and seat, they suit modern properties and design schemes. Due to they’re sharp angles they are a little larger so suit larger more spacious bathrooms

Toilet Seat 8.5cm L- Shape Plastic Hinges A5 Set Bath 2 Toilet Seat 8.5cm L- Shape Plastic Hinges A5 Set Bath

Wood was the traditional material used for toilet seat production and overall produces a good solid and long lasting seat. However if the hinges you have feature adjustment then they will need to be positioned and adjusted correctly so the seat sits in exactly the right place on top the pan before the screws are tightened. Aside from the 2 most common types of toilet seat fixings stated above there are several others, although not that common, if the methods above don’t seem to fit the seat you have then read on below as you may have one of these. Toilet Seat with Hinge Bar and grub Screws To find the correct hole, loosely screw the studs in and position the seat in place and ensure all points above are met.Typically the toilet seat is fixed to the pan by two long screws, one end runs through the base of the hinge and then through the pan using the holes supplied by the manufacturer. A washer and nut are then added and tightened from underneath that then holds the seat in place. The final job, after a few days, is to retighten the fixing nuts once more. As any rubber and plastic compresses it can create a bit of movement and play so this needs to be taken up by tightening the nuts a little further. D-Shape: These seats tend to be modern so suit modern bathrooms and toilets and they are a little larger than more traditional toilets

Toilet Seat Hinges and Fittings - Plumbers Mate Ltd

As there are many different types of adjustable top fixing hinges you will need to refer to the manufacturers instructions included with the kit on how to adjust correctly.The method is to fit the rubber grommet into the pan holes and tighten the screw that engages with the nut and as one tightens, the nut is drawn up by the screwing action that expands the rubber grommet, making it tighten within the hole in the pan. Fixing (domed, stainless washers, fixing nut and bolt): Connects to the hinge plate and fixes everything to the toilet pan