Fast Fit L SHAPE/SHAPED HEAVY DUTY STAINLESS STEEL TOILET SEAT HINGE. WITH NON SLIP FITTINGS/FIXINGS, FOR PLASTIC/NOVELTY TOILET SEATS.

Product Information

The same cleaning agent can then be used when washing your hands after the job is done – assuming you are not sensitive to such cleaning chemicals.

toilet seat spares. Hinges. Bolts. Fittings Packs etc. WC toilet seat spares. Hinges. Bolts. Fittings Packs etc.

These kits are even easier to fit as all you have to do is insert the fixing plugs into the pan, position the seat in place and ensure it’s uniform to the top of the pan and then insert the screws and screw them up and you’re finished.If you have any other bathroom or toilet related problems we have a list of toilet related project pages which explain everything from how to fit a new toilet to how to fix a toilet that wont flush to how to mend a push button toilet cistern. For bottom fixings you will need to look and feel for a plastic winged nut under the pan (in most cases this will be plastic, but in some situations could also be metal). There are quite a few different shapes of toilet around today and many different types of toilet seat to match.

2 Stainless Steel Toilet Seat L- Shape A23 Adjustable Hinges

Some manufacturers utilise a metal fixing that uses a barrel nut positioned under the pan and the bolt is screwed down from the top. The fixing bolt or washer has failed – this sometimes occurs with cheaper seats with plastic fixing bolts. As we have said, the tricky part when it comes to adjustment is, especially with close-coupled suites, to ensure that the adjustment of the seat allows for both sections to be lifted and leant against the cistern whilst also allowing the seat to be supported at all contact points to the top rim of the pan.However, once adjusted, hold the hinge so it doesn’t move, pop the screw down in and screw it up tight and then repeat for the other side. Where metal nuts or wing nuts are used, depending on how old they are they might be very corroded and can be a nightmare to remove. This is due to the fact that they differ slightly in that resin is slightly tougher and harder wearing than standard plastic and, apart from a massive range of different colours and styles, they can also have images and objects inset into them.