Split bed rails (one pair at the head end and one pair at the foot end) also require care in use because the space between the head and foot end rails may vary according to the bed profile adjustment. Therefore, on some designs, entrapment hazards may be created when the bed is adjusted to profiles other than flat. The Management of Health and Safety at Work Regulations 1999 footnote 10 require that employers and the self-employed should make assessments of risk to the health and safety of their workforce and of people not in their employment, and to act upon risks they identify so as to reduce them. using only one side of a pair of bed rails when the other side is against a wall if this is not specifically permitted by the manufacturer – the single rail may be insecure and move. Some manufacturers supply a mattress retainer for use with single sided bed rails which reduces this risk.

Advice – Assess the possible gaps between rails and other equipment, particularly in the high-risk areas shown in Figure 5 during the rail fitting process. What to avoid Care should be taken to use inflatable and padded bed sides correctly, as specified in the manufacturer’s instructions for use.

Best Outdoors: Baby Delight Go with Me Bungalow Deluxe Portable Travel Cot

BS EN 60601-2-52 BS EN 60601-2-52 Full length rails gaps side view, split rails gaps side view and gaps top-down view Appendix 3 – Bed Rail Dimensions in BS EN 50637:2017 Medical electrical equipment. Particular requirements for the basic safety and essential performance of medical beds for children. Description mattress and bed rail combinations where the mattress edge easily compresses, introducing a vertical gap between the mattress and the bed rail. Where manufacturers cannot remove or reduce risks during the design and manufacturing processes, subsequent warnings of any remaining risk should be clearly displayed in the user instructions and product markings. These must constitute acceptable risks when weighed against the benefits to the bed occupant. Any such warnings or limitations to use, including the necessary maintenance schedules throughout its intended life, should be considered both during procurement and by prescribers, passed on to all users and carers of the equipment and steps taken to ensure that they are understood and complied with. When purchasing or making assessments of bed rails for children or adults with atypical anatomy, seek guidance on suitable rails from the manufacturers and assess their compatibility with the size of the individual and the specific circumstances of use. A standard for medical beds for use with children was published in 2017: footnote 4 older beds may not comply with this standard, and so may have larger gaps which are inappropriate for use with children and small adults (See section Standards). This should be considered as part of the risk assessment. Regardless of whether you are staying in a hotel, at grandma’s house or an Airbnb, the beds are most likely to be much higher than your toddler’s bed at home. This makes it much more dangerous for active sleepers who might fall out of bed at night.

MHRA adverse incident investigations have confirmed that some incidents with bed rails have been caused by inadequate maintenance. Bed rails should be included in planned preventative maintenance schemes.The possible combinations of bed rails, beds and mattresses (and other equipment in the environment), together with the individual needs of the bed occupant, means that a robust and person-centred risk assessment of the equipment, environment and the person is necessary to avoid serious incidents. Likewise, the use of patient turning systems for pressure relief carries similar risks of compatibility with other equipment in use and the patient themselves. The best travel bed rails for toddlers, like the hiccapop inflatable bed rail or the Shrunks bed rail, will keep your toddler on the bed. 4. Sharing a Bed Some questions to consider during a risk assessment to determine if the overall risks of using bed rails outweigh the possible benefits include: Integral type bed rails have been involved in far fewer adverse incidents than third-party types. Usually this is because risks associated with installation and compatibility are reduced, as correct gaps are designed into the bed. Bed rails should meet recognised product standards that include acceptable gaps and dimensions when fitted to the bed (See Legislation and Standards).

For more information on gaps permitted by device standards, please see Appendix 2 – Bed rail dimensions in BS EN 60601-2-52 and Appendix 3 – Bed rail dimensions in BS EN 50637. Note that the values expressed in standards are primarily intended for the manufacturers of medical devices. Selection Employees – to take reasonable care for the health and safety of themselves and others affected by their acts, and to co-operate with their employer on health and safety obligations. Health and Social Care Act 2008 (Regulated Activities) Regulations 2014: Regulation 12 A care home had fitted third-party bed rails to a resident’s divan bed. One of the bed rails moved away from the side of the bed, creating a gap in which the resident became trapped and died as a result.For all medical beds except junior beds: gap between side rail and foot board. Other openings defined by accessories (e.g. IV poles, fracture frames etc.) and side rails, head board, foot board, and or mattress platform Paragraph added to the summary section which explains that the government intends to extend acceptance of CE marked devices in Great Britain beyond 30 June 2023. AND Angle between mattress support platform and side rail interface >75° over the entire range of mattress heights from minimum recommended height minus 2 cm to the maximum recommended mattress height plus 2 cm. This document is aimed at all users, carers and staff with responsibility for the provision, prescription, use, maintenance and fitting of bed rails. This includes: Here’s a list of the 5 best portable toddler bed rails that I think you should consider before your next family vacation with your toddler: 1. hiccapop Inflatable Bed Rail for Toddlers

An adverse incident is an event that causes, or has the potential to cause, unexpected or unwanted effects involving the safety of device users (including patients) or other persons. Adverse incidents can be caused by:

Stays Firmly in Place

Use of bed rails in these ways can increase the risk of falling. In some cases, the patient may attempt to climb over the bed rail, leading to the potential to fall from a height. Erratic, repetitive or violent movements may also cause the bed rails to break, leading to an increased risk of falling or injury from the broken rail. Adjustable or profiling beds usually have compatible integral type bed rails available from the manufacturer; these are preferable to other systems that may not fit as well. In all cases it is essential that the selection process follows a risk assessment considering the needs of the bed occupant and the use environment. While not perfect, the above alternatives to bringing inflatable bed rails for toddlers on your family trip will work in a pinch! Our Preferred Option for Toddler Travel Sleeping Bariatric beds allow the mattress base to be widened, however, when the bed is widened, the correct mattress for the bed size must be used. Using the incorrect mattress size could increase the risk of entrapment. Active mattresses, hybrid mattresses and mattress overlays