Alternatively, wallpaper can be applied directly to the surface. We strongly recommend a ‘Paste-The-Wall’ type of wallpaper.

This means I can keep the heating a few degrees lower and still be warm and it has the benefit of providing low-level sound isolation. What are the cons of insulating wallpaper? But there is a positive side: "Having said that it does make the wall feel warmer, reduces condensation and potential mould growth and is relatively cheap — and, better than nothing." Mould looks awful and leads to allergies, asthma and other medical conditions. How does it infiltrate homes? Well, walls that have a cooler surface temperature than the ambient temperature cause condensation, and the wet air breeds nasty mildew formations.If not quite right, leave until completely dry and use a trimming knife to trim and a general purpose filler to fill any holes. Rub down when dry ready for painting or wallpapering over. Can I use wallpaper paste to hang insulating wallpaper? Now slide the insulating wallpaper into place and brush down with a wallpaper brush, using a down and out motion to get rid of air. Once in place get a straight edge – a piece of wood, steel ruler, spirit level will do – and place along the area to be trimmed. Use a sharp trimming knife to get a clean cut. Follow the instructions and apply the liner directly to a surface pre-coated with Thermal Liner Adhesive. However, there's one method that works far better than the rest – thermal wallpaper. What is thermal wallpaper?

There's a wide range of thermal wallpapers and liners to choose from, all of which cater to a range room sizes and surfaces.But commonly insulating lining paper or thermal liners have insulating materials covered with a layer of lining paper, meaning that once hung they can be painted or wallpapered as you would any other wallpaper. Can you paint over insulating wallpaper?

Typically, yes you can but it depends on what type of insulating lining paper you buy. Some insulating lining papers are just a polystyrene roll that needs to be covered with lining paper or wallpaper. The product works by creating a thermal barrier at the wall surface ensuring more heat is retained within the room for massively reduced warm up times and on-going energy savings - at the same time combatting the formation of condensation and the resultant unhealthy and unsightly mould growth.If you're lining a new wall, then you can apply the thermal liner directly to the plasterboard. However, if you're lining an existing wall, then you'll need to apply a primer first. This will ensure that the thermal liner adheres correctly and doesn't come away from the wall. What's more, they're also bacteria and mould-resistant, making them ideal for bathrooms, kitchens or any other areas where dampness is an issue. Reduces your carbon footprint Simply put, it requires less heating to achieve the desired temperature – whether you use gas, electricity or another form of energy.