MP90 Eco Xtreme, Protective Agent for Stone, Marble, Quartz, Granite, Concrete, Polished stoneware, Creates an Extreme and Eco-friendly Protection that limits the Absorption of Water, Oily and coloure

Product Information

Before the product dries (approximately 10-15 minutes), rub the surface with a wet microfibre cloth to further help the product soak into the surface before drying with a clean cloth. Depending on the material and the effect desired, a finishing wax can be applied to porous materials such as natural stone. Thanks to the ultimate FILA technology, this water-based sealer is also safe to use in any setting. This means there’s no need to invest in a collection of products for every project you do – one unique stone sealer is all you need for high-performing protection!

Du påfører MP90 i et jævnt ensartet lag med pensel eller poleruld. Du påfører produktet vådt i vådt og fugerne må gerne blive gennemvædet. Det er vigtigt, at du arbejder med små områder af gangen, så områderne ikke når at blive tørre. MP90 Eco Xtreme fra Fila er plante- og vandbaseret. Det er fri for kulbrintebaserede opløsningsmidler. Produktet har meget lave VOC-emissioner: Certificeret af GEV og mærket med EC1PLUS. Bidrager til LEED-kreditterne, og der kan opnås LEED-certifikat. Apply Fila MP90 ECO XTREME evenly and continuously on a clean and dry surface using a brush or fleece pad, wetting the grout lines as well. Dab any excess product with a clean cloth before it dries. On highly absorbent materials, apply two coats of Fila MP90 ECO XTREME with a 20-minute interval in between. With MP90 ECO XTREME , no dilution is needed, just shake, and this product is ready to go! For materials with a matt finish such as natural stone, terracotta and concrete, this sealer should be applied evenly onto a clean, dry surface, including the grout lines, with a brush or fleece pad. Any excess should then be thoroughly dabbed before the sealer dries with a clean cloth. For materials with a glossy finish like polished marble or porcelain tiles, again, apply this sealer evenly and continuously onto a clean, dry surface. Before the product dries (approximately 10-15 minutes), rub the surface with a wet microfibre cloth to further help the product soak into the surface before drying with a clean cloth. Depending on the material and the effect desired, a finishing wax can be applied to porous materials such as natural stone. MP90 ECO XTREME – Big protection, little impact

Fila Industria Chimica Spa

Reducing absorption without affecting the material’s natural look, MP90 ECO XTREME does not form surface film, is resistant to UV rays, is non-yellowing and gives lasting protection over time (according to ASTM G154 standards), and is breathable (according to EN ISO 7783-2 standards).

Made up of organic resins in aqueous suspension (density: 1.004 kg/l; pH: 9.9; flashpoint > 93°C), this sealer offers extreme water and oil repellent action which is free of hydrocarbon solvents. It is also suitable for horizontal or vertical surfaces, both indoors and outdoors, but is ideally suited for protecting kitchen and bathroom tops. MP90 ECO XTREME can be used for all kinds of natural stone with any kind of finish to prevent the material from being permanently damaged by water or dirt absorption. From the terrazzo flooring at 100 Liverpool Street to the Statuarietto marble throughout Southbank Place, it brings us great pleasure to see our eco-compatible protector perform in these places. In fact, 100 Liverpool Street is a low carbon building, and it earned an ‘Outstanding’ BREEAM score, with a post-construction certification of 89.2%.Uanset om overfladerne er med blank finish eller patineret, børstet eller matte bevarer MP90 Eco overfladernes egenskaber. Produktet danner ikke film og gulner ikke. Du skal altid teste produktet inden brug på en tilsvarende flise eller et ikke-synligt sted. Testen skal vise, om produktet har den ønskede virkning uden flisen tager skade. MP90 ECO XTREME can be used for all kinds of natural stone with any kind of finish to prevent the material from being permanently damaged by dirt absorption. Likewise, it’s ideal for polished natural stone and concrete to facilitate cleaning whilst providing water-repellent protection. Thanks to the ultimate FILA technology, this water-based sealer is also safe to use in any setting. This means there’s no need to invest in a collection of products for every project you do – one unique stone sealer is all you need for high-performing protection!

Shown below are two images of this sealer in action, a test our research and development team performed on limestone. In the first section of the right-hand image, you can see the graffiti removed from an untreated area; in the middle, you can see the graffiti removed from an area treated with MP90 ECO XTREME and in the last section, you can see the stone, treated with another product, and half cleaned. Likewise, it’s ideal for polished natural stone and concrete to facilitate cleaning whilst providing water and oil repellent protection. For at få en ekstra flot finish kan du påføre en finishvoks fx Matt voks på overflader af sten, der er lagt indendørs. MP90 ECO XTREME does not substantially alter the degree of slipperiness of the material (according to ASTM C 1028-2007 [E2010] and BS 7976-2 2002), and neither does it alter the gloss level of the material (according to ASTM D523-08).MP90 ECO XTREME is widely used by many reputable names in the technical stone market. Liked for its ability to treat even the most delicate of materials, this sealer also protects many of the surfaces in some of the UK’s most prominent buildings. Lad virke i 10-15 minutter. Tør overfladerne efter med en klud. Før produktet tørrer, skal du fjerne eventuelt overskydende beskyttelsesmiddel med en ren klud. If you’re looking to streamline your projects, try MP90 ECO EXTREME stone sealer. It only takes a single-coat application and a gentle rub before it is completely absorbed.